1: Product Name: Airtac MA series Stainless steel Mini cylinder Double acting type
2. Order code
3: Product Features 1.Standard cylinder manufactured by our enterprise.
2.Piston adopts heterogeneous two-way seal structure. It has compact size and has the function of grease reservation.
3.There are several modes of back cover, which makes the installation of cylinder more convenient.
4.Front cover has fixed bumper which can reduce the impact of direction change of the cylinder.
5.Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.
6.The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.
7.There are cylinders and mounting accessories with several specifications for your choice.
8.All cylinders of this series have magnet.
4. Specification | Bore size (mm) | 16 | 20 | 25 | 32 | 40 | 50 | 63 |
| Acting type | MSA, MTA | Single acting | - |
| MA, MAD, MAJ | Double acting | - |
| MAR | - | Double acting |
| MAC, MACD, MACJ | - | Double acting with cushion |
| Fluid | Clean air |
| Operature pressure | Double acting | 0.1~1.0 MPa |
| Single acting | 0.2~1.0 MPa |
| Proof pressure | 1.5MPa |
| Temperature | —20~70 |
| Speed range mm/s | Double acting: 30~800 Single acting 50~800 |
| Cushion type | MAC, MACD, MACJ Series: Adjustable cusion Other series: bumper |
| Port size | M5x0.8 | 1/8" | 1/4" |
5: Installation 1.When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
4.The medium used by cylinder shall be filtered to 40μm or below.
5.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
6.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8.To avoid side load, otherwise, piston rod will be bent and deformed and damage the thread at the end of the rod. Single-acting type can not be added in return.
9.If the cylinder is dismantled and stored for a long time, please to conduct anti-rust treatment to the surface. Anti-dust caps shallbe added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.
6: Structures and Dimension 1. MA and MAC series
2. MAC series
7: Delivery 1. If the products we have in store, we will send it out ASAP after payment.
2. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.
3. Also we can send by your delivery acount if you want.
4. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
8: Samples You can send a sample to customize the products, we have many engineers can help it; If you want a product of mine, but you are not sure if it's what you want, so you can ask for a sample from me, it will be free.
9: After-sale service We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
