Ningbo Fly Automation Co., Limited
You are here: Home » Products » Pneumatic Cylinder » Airtac Cylinder » Airtac SC series Stainless steel cylinder SC 40x100 Double acting type


Share to:

Airtac SC series Stainless steel cylinder SC 40x100 Double acting type

SC series stainless steel cylinder can be used in very bad environment.
  • SC 40x100
  • Airtac
  • 0015
  • Stainless steel
  • 40mm
  • 100mm
  • 0.1~1.0MPa
  • -10 to +70℃
  • Double acting
1: Product Name: Airtac SC series Stainless steel cylinder SC 40x100 Double acting type

2: Order code

3: Specification
Bore size(mm) 32 40 50 63 80 100
Acting type Double acting
Fluid Air (to be filtered by 40 um filter element)
Mounting type SC Basic FA FB CA CB CR LB TC FTC TCM1
Operating pressure 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Proof pressure 1.5MPa(215psi)(15bar)
Temperature  °c -20~80
Speed range mm/s 30~800
Cushion type Variable cushion
Adjustable cushion stroke mm  21 28 29
Port size 1/8" 1/4" 3/8" 1/2"
4: Product features
1. Standard cylinder manufactured by our enterprise.
2. The buffer adjustment of cylinder is smooth and steady.
3.It is tie rod cylinder. The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.
4. Cylinders and mounting accessories with several specifications are optional.
5. Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
6. The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
7. The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.
5: Product instructure
1. SC series cylinders
2. SCD SCJ series cylinders

6: Installation Usage
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
5. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
6. The medium used by cylinder shall be filtered to 40μm or below.
7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.
7: Samples
You can send a sample to customize the products, we have many engineers can help it; If you want a product of mine, but you are not sure if it's what you want, so you can ask for a sample from me, it will be free.
8: Products Shopping Guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.
9: After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.


  Company:Ningbo Fly Automation Co., Limited
 Tel:0086-574-88871448
  Fax:0086-574-56655151  
 QQ/Wechat:625118373
Copyright  2015 Ningbo Fly Automation Co., Limited. All rights reserved.  Supported by 宁波谷谷米网络科技有限公司