Ningbo Fly Automation Co., Limited
You are here: Home » Products » Pulse Jet Valve » Diaphragm Repair Kit » K2529 Goyen Pulse jet valve RCAC25T3 RCAC25FS3 CAC25TS3 Diaphragm repair kit


This product has been off the shelf!


Share to:
sharethis sharing button

K2529 Goyen Pulse jet valve RCAC25T3 RCAC25FS3 CAC25TS3 Diaphragm repair kit

1. Model: K2529-Nitrile
2. Suitable for: Goyen 3 series pulse jet valve
  • K2529 K2530

  • Goyen

  • 0074

1. Product Name: K2529 Goyen Pulse jet valve RCAC25T3 RCAC25FS3 CAC25TS3 Diaphragm repair kit

Goyen 3 series pulse jet valve

2. Description

Superior performance, easy maintenance diaphragm valve available with threaded ports (T3), dresser nut ports (DD3) or flange and slide ports (FS3). Outlet at 90° to inlet. 3 Series valves are available as remote pilot valves and may be converted to integral pilot applications through the use of the screw in pilots of the MIP and 3DS series. All 3 Series valves are supplied with CASTEC protection, offering 500 hours resistance to salt spray.
3. Suitable for
Dust collector applications, in particular for reverse pulse jet filter cleaning and its variations including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.
4. Operation
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
5. Maintenance
Before conducting any maintenance activity on the system ensure that components are fully isolated from pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled. Diaphragm and pilot inspection should be conducted annually.
6. Installation
For your safety do not pressurise system until all valves and pipes are fully secured. Do not attempt to remove a fitted valve while system is under pressure.
1. Prepare supply and blowtube pipes* to suit valve type and specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes (or flanges, tighten bolts to 10Nm) and blowtube to valves, ensuring no excess thread sealant can enter the valve itself. Ensure blowtube is fully inserted into the valve outlet.
5. Tanks and pipes must be independently restrained from FS and DD valves.
6. Connect RCAC pilot port to remote pilot valve, or install MIP/3DS screw in pilot valve.
7. Apply moderate pressure to system and check for installation leaks.
8. Fully pressurise system.
9. Test fire and listen for proper actuation and crisp pulse noise. Valve is not a structural component. Do not rely on valve to retain tanks or pipe. Refer to Camlock product specifications for installation details.

7. Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.

8. Quality Standards
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.


  Company:Ningbo Fly Automation Co., Limited
 Tel:0086-574-88871448
  Fax:0086-574-56655151  
 QQ/Wechat:625118373
Copyright  2015 Ningbo Fly Automation Co., Limited. All rights reserved.  Supported by 宁波谷谷米网络科技有限公司