3. GENERAL
Differential pressure: 0,35 - 8,5 bar [1 bar = 100kPa]
Ambient temperature range: -20 to +85°C
4. FEATURES 1. The pulse diaphragm valves are especially designed for dust collector service applications, combining high flow, long life and extremely fast opening and closing to produce reliable and economical operation
2. The high flow, angle type bodies in combination with the special main diaphragm assemblies give the unique operating features required for dust collector service applications
3. The design with integral compression fittings will facilitate installation because there is no need for threaded piping
4. The high quality diaphragms are reinforced and wear resistant to guarantee a long operating life, even under harsh conditions
5. Integral pilot operated valves satisfy all relevant EC directives
5. MATERIALS IN CONTACT WITH FLUID
Note: Ensure that the compatibility of the fluids in contact with the materials is verified
Body: Aluminium
Core tube: Stainless steel
Core and plugnut: Stainless steel
Springs: Stainless steel
Seals & disc: NBR (nitrile)
Diaphragms: CR (chloroprene)
Shading coil: Copper
6. ELECTRICAL CHARACTERISTICS
Coil insulation class: F
Connector: Spade plug (cable Φ 6 - 10 mm)
Electrical safety: IEC 335
Standard voltages: DC (=): 24V (Other voltages and 60 Hz on request) AC (~): 24V - 115V - 230V / 50 Hz
7. INSTALLATION
1. The valves can be mounted in any position without affecting operation
2. Threaded pipe connection is: G (ISO 228/1) or compression fitting
3. For compression fitting types tightness is achieved by the compressed gasket on the blow tube
4. The use of the rubber gaskets as sealing members will allow a slight misalignment in piping
5. Other pipe threads are available on request
6. Installation/maintenance instructions are included with each valve
7. Spare Parts Kit and replacement coils are available
8. OPTIONS
1. Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE 10
2. Explosionproof solenoids for hazardous locations according to “ATEX” (CENELEC) and national standards
3. Electronic timer
4. Explosionproof and watertight solenoids according to “NEMA” standards
5. Hose connection executions (3" only)
6. Compliance with “UL” standards
7. Plug with visual indication and/or peak voltage suppression
8. Valves can also be supplied with FPM (fluorelastomer) diaphragms and seals. Use the appropriate suffix letter for identification
9. Structures and Dimension
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.