Ningbo Fly Automation Co., Limited
You are here: Home » Products » Pneumatic Cylinder » Airtac Cylinder » TN 10x50S Airtac TN series Twin-rod cylinder Double acting type


Share to:

TN 10x50S Airtac TN series Twin-rod cylinder Double acting type

TN series cylinder has different bores, 10mm,16mm, 20mm, 25mm, 32mm are all available. You can choose different models according to the requirements.
  • TN 10x50S
  • Airtac
  • 0024
  • Aluminium
  • 10mm
  • 50mm
  • 0.1~1.0MPa
  • -5 to +70℃
  • Bumper
1: Product Name: TN 10x50S Airtac TN series Twin-rod cylinder Double acting type

2: Order Code
order code

1) TN series are alll with magnet
2) When the thread is standard, the code is blank
3: Specification
Bore size(mm) 10 16 20 25 32
Acting type Double acting
Fluid Air (to be filtered by 40 um filter element)
Operating pressure 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Proof pressure 1.5MPa(215psi)(15bar)
Temperature  °c -20~70
Speed range mm/s 30~500
Adjustable stroke mm  -10~0
Cushion type Bumper
Non-rotating tolerance ±0.4° ±0.3°
Port size M5x0.8 1/8"
4: Product Features
1. Enterprises standard is implemented.
2. It is good resistance to bending and twisting moments.
3. Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
4. Embeded installation and fixation mode saves the installation space.
5. Mounting holes on three sides facilitates multi-position mounting.
6. Standard configuration of this series has magnet and the type without magnet is not available.
5: Installation Usage
1. When load changes in the work, the cylinder with abundant output capacity shall be
2. The medium used by cylinder shall be filtered to 40μm or below.
3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4. As both the front cover and piston are short, too large stroke can not be ed.
5. The cylinder shall avoid redial load in operation to maintain the normal and extend service life.
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
8. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be ed into the inlet and outlet ports. As the precision of the manufacture and guide is high, Please do not dismantle the fixed block or cylinder cover.
6: Material of major parts
material of the major parts
7: Structures and Dimension
1. Φ10
structure 1
2. Φ16~Φ25
structure 2
3: Φ32
structure 3
8: Samples
You can send a sample to customize the products, we have many engineers can help it; If you want a product of mine, but you are not sure if it's what you want, so you can ask for a sample from me, it will be free.
9: After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
10: Serves Time
0:00 - 23:59
From Monday to Sunday


  Company:Ningbo Fly Automation Co., Limited
 Tel:0086-574-88871448
  Fax:0086-574-56655151  
 QQ/Wechat:625118373
Copyright  2015 Ningbo Fly Automation Co., Limited. All rights reserved.  Supported by 宁波谷谷米网络科技有限公司