1: Product Name: Airtac ISO15552 standard SI series cylinders SI 50x100 Double action 2: Order code
3: Features 1. ISO15552 (original ISO6431) standard cylinder;
2. The buffer adjustment of cylinder is smooth and steady;
3. The shaped aluminum pipe without tie rod has good corrosion esistance;
4. The pistion seal is composed of two Y-shape one-way seal structure, which has compensation funtion, long service life and low start-up pressure;
5. Cylinders and accessories for installable with several specifications are optional.
4: Specification | Bore size(mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 |
| Acting type | Double acting |
| Fluid | Air (to be filtered by 40 um filter element) |
| Mounting type | SI | Basic FA FB CA CB CR LB TC FTC TCM1 TCM2 |
| SID SIJ | Basic FA LB TC FTC TCM1 TCM2 |
| Operating pressure | 0.1~1.0MPa(15~145psi)(1.0~10.0bar) |
| Proof pressure | 1.5MPa(215psi)(15bar) |
| Temperature °c | -20~80 |
| Speed range mm/s | 30~800 | 30~500 |
| Cushion type | Variable cushion |
| Adjustable cushion stroke mm | 27 | 30 | 36 | 40 | 50 |
| Port size | 1/8" | 1/4" | 3/8" | 1/2" | 3/4" |
5: Installation 1. When load changes in the work, the cylinder with abundant output capacity shall selected.
2. Relative cylinder with high temperature resistance or corrosion shall be chose under the condition of high temperature or corrosion
3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and the service life.
5.The medium used by cylinder shall be filtered to 40um or below.
6. Nti-freezing measure shall be adopted under low temperature environment to prevent mois ture freezing.
7.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the
entrance of particles into the cylinder.
8. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to
the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface.
Anti-dust caps shall be added in air inlet and outlet ports.
6: structure 7: Quality Standards The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.
8: Delivery 1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.
4. Also we can send by your delivery acount if you want.
9: After-sale Service We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
