Ningbo Fly Automation Co., Limited
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
You are here: Home » Products » Pneumatic Cylinder » Airtac Cylinder » Airtac MI series Stainless steel Mini cylinder with ISO6432 standard
Share to:

Airtac MI series Stainless steel Mini cylinder with ISO6432 standard

1. MI series stainless steel MINI cylinders
2. According to the bore and stroke, it can be divided many different types
3. Please contact freely if you have some requirement

Quantity:
  • MI series cylinder
  • Airtac
  • 0044
  • Stainless steel
  • Selectable
  • Selectable
  • 0.1~1.0MPa
  • 1.5MPa
  • -20~70℃
1. Product Name: Airtac MI series Stainless steel Mini cylinder with ISO6432 standard

2. Order Code
Order code
3. Product Specification

Bore 8 10 12 16 20 25 32 40
Acting type Double acting, Single acting push, Single acting pull 
Double acting with cushion
Fluid Air (to be filtered by 40 um filter element)
Operating pressure Double acting 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Single acting 0.2~1.0MPa(28~145psi)(2.0~10.0bar)
Proof pressure 1.5MPa(215psi)(15bar)
Temperature ℃ -20~70
Speed range mm/s Double acting: 30~80  Single acting: 50~800
Stroke tolerance 0~150(+1.0~0)>150(+1.4~0)
Cushion MIC series: Variable cushion  Other series: Bumper
Port size M5x0.8 1/8" 1/4"
4. Product Features
1.In accordance with ISO6432 standard(Φ8~Φ25).
2.Front and back cover owns fixed bumper pad which can reduce the impact of direction-change of the cylinder.
3.Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.
4.There are several mode of back cover, which makes the installation of cylinder more convenient.
5.There are cylinders and accessories with several specifications for installation for your choice.
6.Piston rod and cylinder body with the material of stainless steel make the cylinder adapt general working environment with corrosivity.
5. Inner structure and material
MI series inner structure

NO. Item Material
1 Rod SUS304
2 Rod nut Carbon steel
3 Front cover packing NBR
4 Front cover nut Carbon steel
5 Bushion Wear resistant material
6 Front cover Aluminium alloy
7 Barrel SUS304
8 Bumper TPU
9 Piston Φ8~Φ12 SUS304
Others Aluminium alloy
10 Psiton seal NBR
11 Wear ring Wear resistant material
12 Nut Carbon steel
13 Back cover Aluminium alloy
6. Installation method
1.When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4.The medium used by cylinder shall be filtered to 40μm or below.
5.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
6.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
7.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.
7. Competitive Advantage
Our product features Our Services Guarantee:
1) Competitive price 1) Prompt respond (Reply with 24 hours)
2) Good quality 2) Free Samples (Customer pay for the delivery cost)
3) Professional Packaging 3) Registration support.
4) Produce according to Customers’ instruction 4) Photos/videos are available during production.
5) None delay shipment 5) Loading inspection, and send loading photos before shipment.
8. Samples
You can send a sample to customize the products, we have many engineers can help it; If you want a product of mine, but you are not sure if it's what you want, so you can ask for a sample from me, it will be free.
9. Serves Time
0:00 - 23:59
From Monday to Sunday

CONTACT US

  Company:Ningbo Fly Automation Co., Limited
 Contacts:Airwolf
  Phone:+0086-18957877638
 Tel:0086-574-88871448
  Fax:0086-574-56655151  
 QQ/Wechat:625118373
 Skype:flypmc@hotmail.com 
 E-mail:airwolf@fly-pneumatic.com
 
Copyright  2015 Ningbo Fly Automation Co., Limited. All rights reserved.  Supported by 宁波谷谷米网络科技有限公司