Ningbo Fly Automation Co., Limited
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
You are here: Home » Products » Pneumatic Cylinder » Airtac Cylinder » Airtac SC series Pneumatic cylinder SC 63x50 Double acting type
Share to:

Airtac SC series Pneumatic cylinder SC 63x50 Double acting type

According to the bore and stroke, Airtac SC series cylinder has many different types, if you want a other type of SC series, you can contact me freely.

Quantity:
  • SC 63x50
  • Airtac
  • 0049
  • Aluminium
  • 63mm
  • 50mm
  • Double acting
  • Air (to be filtered by 40 μm filter element)
  • 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
  • 1.5MPa(215psi)(15bar)
  • -20~80℃
  • 30~800
  • 3/8"
1: Product name: Airtac SC series Pneumatic cylinder SC 63x50 Double acting type

2: Ordering Code
订购码
3:  Product Features

1. 1.Standard cylinder manufactured by our enterprise.
2. It is tie rod cylinder. The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.
3. The buffer adjustment of cylinder is smooth and steady.
4. The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
5. Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
6. The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.
7. Cylinders and mounting accessories with several specifications are optional.
4: Specification
Bore size(mm) 32 40 50 63 80 100
Acting type Double acting
Fluid Air (to be filtered by 40 um filter element)
Mounting type SC Basic FA FB CA CB CR LB TC FTC TCM1
SCD SCJ Basic FA LB TC TCM1
Operating pressure 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Proof pressure 1.5MPa(215psi)(15bar)
Temperature  °c -20~80
Speed range mm/s 30~800
Cushion type Variable cushion
Adjustable cushion stroke mm  21 28 29
Port size 1/8" 1/4" 3/8" 1/2"
5: Installation
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
3. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
4. The medium used by cylinder shall be filtered to 40μm or below.
5. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
6. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
7. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
8. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.
6: Competitive Advantage
Our product features Our Services Guarantee:
1) Competitive price 1) Prompt respond (Reply with 24 hours)
2) Good quality 2) Free Samples (Customer pay for the delivery cost)
3) Professional Packaging 3) Registration support.
4) Produce according to Customers’ instruction 4) Photos/videos are available during production.
5) None delay shipment 5) Loading inspection, and send loading photos before shipment.
7: Products Shopping Guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.
8: After-sale service
After-sale service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.

CONTACT US

  Company:Ningbo Fly Automation Co., Limited
 Contacts:Airwolf
  Phone:+0086-18957877638
 Tel:0086-574-88871448
  Fax:0086-574-56655151  
 QQ/Wechat:625118373
 Skype:flypmc@hotmail.com 
 E-mail:airwolf@fly-pneumatic.com
 
Copyright  2015 Ningbo Fly Automation Co., Limited. All rights reserved.  Supported by 宁波谷谷米网络科技有限公司