1: Product Name: Airtac SC series Transparent cylinder 50mm Bore 50mm Stroke Double acting typeacting type
2: Order code 3: Specification
4: Installation Usage
| Bore size(mm) || 32 || 40 || 50 || 63 || 80 || 100 |
| Acting type || Double acting |
| Fluid || Air (to be filtered by 40 um filter element) |
| Mounting type || SC || Basic FA FB CA CB CR LB TC FTC TCM1 |
| SCD SCJ || Basic FA LB TC TCM1 |
| Operating pressure || 0.1~1.0MPa(15~145psi)(1.0~10.0bar) |
| Proof pressure || 1.5MPa(215psi)(15bar) |
| Temperature °c || -20~80 |
| Speed range mm/s || 30~800 |
| Cushion type || Variable cushion |
| Adjustable cushion stroke mm || 21 || 28 || 29 |
| Port size || 1/8" || 1/4" || 3/8" || 1/2" |
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
6. The medium used by cylinder shall be filtered to 40μm or below.
7. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
8. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports. 5: Product features
1. Standard cylinder manufactured by our enterprise.
2. The buffer adjustment of cylinder is smooth and steady.
3. Cylinders and mounting accessories with several specifications are optional.
4. Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
5.It is tie rod cylinder. The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.
6. The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
7. The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃. 6: Delivery
1. If the goods we have in store, we will send it out as soon as possible after payment, if have no in store, we will arrange production after received the deposit or all the payment for goods.
2. All the goods can be sent by DHL, TNT, Fedex or any other express you wanted. 7: Product Instructure
1. SC series cylinders
2. SCD SCJ series cylinders 8: Products Shopping Guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you. 9: Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.
3. Also we can send by your delivery acount if you want.
4. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it. 10: After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.