BVP-60C Taiwan Finetek Pneumatic Oscillator BVP Sreies Pneumatic percussion hammer

1. Product name: BVP-60C Taiwan Finetek Pneumatic Oscillator BVP Sreies Pneumatic percussion hammer

2. Performance parameter

Type	Frequency / per minute			Vibration force (N)			Air consumption	Weight
	0.2MPa	0.4MPa	0.6MPa	0.2MPa	0.4MPa	0.6MPa
BVP-30C	1765	2308	2857	195	380	560	230	0.9kg
BVP-40C	1333	1677	1875	275	531	715	249	1.9kg
BVP-60C	1000	1200	1340	404	780	1030	269	4.5kg

3. Typical application

· Vibration

· Empty

· Delivery

· Dashing and filming

4. Size

Type	A	φB	φC	D	φH	IN	OUT
BVP-30C	138	80	60	12	9	1/8"	1/8"
BVP-40C	166	100	75	16	11	1/4"	1/4"
BVP-60C	208	140	105	16	15	1/4"	1/4"

5. Description

The shape of the BVP series is very close to that of a normal air hammer. Practical application is more convenient than ordinary air hammer. Ordinary air hammers generally require solenoid valve reversal to be able to strike normally. The BVP series only needs to input the air source, and it can be continuously tapped without the valve reversing, which is very convenient. The products of the BVP series and the NPT series are basically interchangeable. In contrast, the BVP series is less frequent.

6. Product show

7. After-sale service

We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.

8. Drawing

9. Characteristic

· High-strength aluminum alloy hardening treatment

· Low frequency vibration for better damage to the bridge

· The pressure can be adjusted according to the demand to adjust the vibration force

· Instant start and momentary shutdown

· Just need to input the gas source to continue tapping

· Low noise, can be used in installation sites