1: Product Name: TN 32x50S Airtac TN series Twin-rod actuator Double acting type
2: Order Code
Note:
1) TN series are alll with magnet
2) When the thread is standard, the code is blank
3: Product Features 1. Enterprises standard is implemented.
2. It is good resistance to bending and twisting moments.
3. Mounting holes on three sides facilitates multi-position mounting.
4. Embeded installation and fixation mode saves the installation space.
5. Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
6. Standard configuration of this series has magnet and the type without magnet is not available.
4: Specification | Bore size(mm) | 10 | 16 | 20 | 25 | 32 |
| Acting type | Double acting |
| Fluid | Air (to be filtered by 40 um filter element) |
| Operating pressure | 0.1~1.0MPa(15~145psi)(1.0~10.0bar) |
| Proof pressure | 1.5MPa(215psi)(15bar) |
| Temperature °c | -20~70 |
| Speed range mm/s | 30~500 |
| Adjustable stroke mm | -10~0 |
| Cushion type | Bumper |
| Non-rotating tolerance | ±0.4° | ±0.3° |
| Port size | M5x0.8 | 1/8" |
5: Installation Usage 1. When load changes in the work, the cylinder with abundant output capacity shall be
2. The medium used by cylinder shall be filtered to 40μm or below.
3. As both the front cover and piston are short, too large stroke can not be ed.
4. The cylinder shall avoid redial load in operation to maintain the normal and extend service life.
5. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
6. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
7. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
8. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be ed into the inlet and outlet ports. As the precision of the manufacture and guide is high, Please do not dismantle the fixed block or cylinder cover.
6: Material of major parts 7: Structures and Dimension 1. Φ10
2. Φ16~Φ25
3: Φ32
8: Delivery 1. If the products we have in store, we will send it out ASAP after payment.
2. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.
3. Also we can send by your delivery acount if you want.
4. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
9: Products Shopping Guide For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.
10: Quality Standards The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.
